19
If pump 1, 2, 3, 4, 5 or the blower is not working:
• Verify if an error
message is displayed on
the keypad� If so, refer
to the corresponding
section�
• Ensure the selected
low-level configuration
is compatible with your
spa material�
• Verify the indicator
linked to your pump
and blower on the
keypad turns on when
you press on the
corresponding key�
If the indicator does not
light up:
• Use a replacement
keypad to verify the
state of the original�
• Replace the keypad if
defective�
• If the keypad works
correctly, replace the
control system�
If the indicator lights up:
• Verify your pump is
working on both speeds
(if dual speed pump)
and your accessories
works correctly
(ex: blower)�
Pump 1, 2, 3, 4, 5 or the blower is not working
Troubleshooting
in.ye and in.yt
in.ye-V3
in.xe
Pump 1 indicator
in.yj
To Next Page
Loading...
Need help?
General
