Need help?Do you have a question about the Geeetech Acrylic I3 Pro B and is the answer not in the manual?
General| Build Volume | 200 x 200 x 180 mm |
|---|---|
| Print Technology | FDM (Fused Deposition Modeling) |
| Layer Resolution | 0.1-0.3mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Frame Material | Acrylic |
| Connectivity | USB, SD Card |
| Heated Bed | Yes |
| Bed Temperature | Up to 110 °C |
| Software | Repetier-Host, Cura |
| Supported Materials | PLA, ABS |
| Power Supply | 12V |
To Next Page
