Need help?Do you have a question about the Geeetech A10M and is the answer not in the manual?
General| Print Technology | Fused Deposition Modeling (FDM) |
|---|---|
| Build Volume | 220 x 220 x 260 mm |
| Layer Resolution | 0.1-0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Extruder Temperature | 250°C |
| Max Hotbed Temperature | 100°C |
| Connectivity | SD card, USB |
| Number of Extruders | 2 |
| Machine Dimensions | 478 x 413 x 485 mm |
| Net Weight | 7.8 kg |
| Filament Compatibility | PLA, ABS, Wood |
| Display | LCD |
| Power Supply | 24V |
Essential safety precautions for operating the 3D printer.
Step-by-step guide to assembling the printer's main frame.
Instructions for connecting the printer's internal wiring.
Detailed steps for leveling the printer's build platform.
Procedure for printing models using an SD card.
Steps to install necessary drivers for connecting the printer.
Guide to installing and configuring slicing software like Repetier-Host.
Steps for printing models directly from a computer via USB.
To Next Page
