Need help?Do you have a question about the Geeetech A10 and is the answer not in the manual?
General| Build Volume | 220 x 220 x 260 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Bed Temperature | 100°C |
| Connectivity | SD card, USB |
| Print Technology | FDM (Fused Deposition Modeling) |
| Frame Material | Aluminum |
| Heated Bed | Yes |
| Display | LCD |
| Machine Dimensions | 478 x 413 x 485 mm |
| Max Nozzle Temperature | 250°C |
| Supported Materials | PLA, ABS |
| Power Supply | 24V |
Overview of the Geeetech A10 3D printer features, build volume, and technology.
Steps for unpacking the 3D printer, checking accessories, and initial placement.
Details on power supply, Repetier-Host, Arduino IDE, and firmware.
Instructions for installing USB drivers on Windows and Mac OS.
Basic Repetier Host setup, language selection, and creating a new printer profile.
Establishing serial connection, and configuring printer, extruder, and movement settings.
Performing motor, extruder, and LCD controller tests for functionality.
Step-by-step guide to leveling the printer's build platform for print quality.
Configuring layer height, speed, and filament parameters in Slic3r.
Adjusting printer settings, including bed shape and loading custom parameters.
Steps for loading models, slicing, and creating G-code files.
Preparing and printing models using an SD card and the printer's LCD.
Procedures for uploading firmware and changing motor direction.
Troubleshooting common printing problems and quality optimization.
Technical specifications and contact details for support.
To Next Page
