7.2 Filament Setting
Set the filament diameter and printing temperature in the tab of Filament settings. Here we use 1.75mm PLA.
Usually the temperature of the print head is 195-210
℃
, the hot bed is 60-70
℃
. Here we set them as 200
℃
and 65
℃
. If you use ABS filament, the recommended temperature of the print head is 230-240
℃
(for the
actual temperature please refer to the data from manufacture of filament) and 90-110
℃
for the hot bed.
To Next Page
Loading...
