Need help?Do you have a question about the Geeetech A30 and is the answer not in the manual?
General| Build Volume | 320 x 320 x 420 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD card |
| Frame Material | Aluminum |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Supported Filaments | PLA, ABS, PETG |
| Display | LCD |
| Power Supply | 24V |
| Bed Temperature | Up to 110°C |
| Nozzle Temperature | Up to 250°C |
| Printing Platform | Removable glass platform |
Explains FCC rules for Class B digital devices and potential radio frequency interference.
Covers warnings about temperature, moving parts, shock risk, unattended operation, and material usage.
Describes the initial screen with main menu functions: control, printing, and setting.
Details printer control operations: Home, Move, Fan, Leveling, and Filament.
Covers Wi-Fi, Language, Touch Screen Calibration, About, and Factory Default settings.
Explains printing via EasyPrint 3D software, including connection, slicing, and preparation.
Details printing directly from a TF card without a computer connection.
Covers wireless printing using the EasyPrint 3D App, including installation, binding, Wi-Fi configuration, and cloud printing.
Covers common printing issues like non-extrusion, adhesion, and stringing, providing troubleshooting steps.
Provides instructions on updating printer firmware using EasyPrint 3D software.
Offers solutions for common problems encountered during Wi-Fi setup.
To Next Page
