Geeetech A30 User Manual

22
Notes:
i. When you finish leveling job, we recommend you test the build platform again
to ensure the satisfying leveling.
ii. When the printer is violently shaken during shipping and moving, the height of
the build platform may be affected. You need readjust the leveling.
iii. When there is the wrapping, curling or after you dismount the extruder, please
readjust the leveling.
After restoring factory settings, we suggest you check the height of the nozzle and platform.
4. Start to Print
Geeetech A30 could be used under three conditions: printing with EasyPrint 3D,
stand-alone printing with a TF card and printing via Wi-Fi connectivity.
4.1 Printing with EasyPrint 3D
We use EasyPrint 3D as the printing and control software by default. Please click on
here to download.
After your downloading, it is convenient to install this software by following the

Geeetech A30 Specifications

General

Build Volume	320 x 320 x 420 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Supported Filaments	PLA, ABS, PETG
Display	LCD
Power Supply	24V
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Printing Platform	Removable glass platform