Geeetech A10T - User Manual

Shenzhen Getech Technology Co.,Ltd
1
Geeetech A10T 3D Printer
User Manual (V1.10)

Geeetech A10T Specifications

General

Brand	Geeetech
Model	A10T
Category	3D Printers
Language	English

Summary

1 Attention

1.1 Safety instructions

Essential safety precautions and guidelines for operating the 3D printer.

1.3 Risk statement

5 Assembling

5.1 Assembling the main frame

Step-by-step guide for assembling the primary structural components of the printer.

5.2 Wire connection

Instructions for correctly connecting all necessary electrical wires and cables.

5.3 Check the power input mode

5.4 Check the filament

6 First print

6.1 Level the print bed

Detailed steps for calibrating the print bed for optimal first layer adhesion.

6.2 TF card printing

Instructions on how to initiate a print using a TF (microSD) card.

7 Introduction to the LCD menu

7.2 Main functions

8 Software setting

8.1 Install driver

Guide for installing necessary drivers for USB connection and printer communication.

8.2 Install slicing software

Instructions for setting up and configuring slicing software like Repetier-Host.

8.3 USB printing

Steps for performing prints directly from a computer via USB connection.

8.4 TF card printing

Detailed process for preparing and initiating prints from a TF card.

10 Function introduction

10.1 Power loss-resuming capability

10.2 Reset button

10.3 Filament run-out sensor (Optional)

10.4 3 D touch for auto bed leveling (Optional)

11 FAQ (Frequently Asked Questions)

11.1 Abnormal extrusion

11.2 The gear of the extruder skips and makes an abnormal noise

11.3 First layer abnormal

11.4 Layer shift

11.5 Print stopped