Geeetech A10T - 8.2 Install slicing software

Shenzhen Getech Technology Co.,Ltd
30
8.2Install slicing software
Repetier-Host is the default slicing software here. Download address:
https://www.repetier.com/download-software/
 Set printer parameters
When Repetier-Host is installed, turn on the printer and open the Repetier-Host. Repetier-Host
supports several languages. You can choose your native language from Config>Language (Picture
8-4 for details).
(Picture 8-4)
English interface for your reference (picture 8-5).