Shenzhen Getech Technology Co.,Ltd
21
7.2Main functions
LCD rotating knob:
Press the knob: Confirm or enter the next menu.
Rotate the knob: Roll the select options or change parameters.
LCD homepage, see picture (7-2)
1. Extruder temperature: Current temp/target temp
2. Hot bed temperature: Current temp/target temp
3. Current Z axis value
4. Current print time
5. Current printing process
6. Current printer status information
7. Feed rate: Current print feeding speed
8. Mix-color printing ratio: E0; E1; E2%
(Picture 7-2)
Note: Rotating the knob can change the printing feed rate during printing. We suggest users not
changing the feed rate too much or it will make the motors to skip caused by too fast speed
and affect the print quality.
Press the knob to enter the next menu (Picture 7-3), (Picture 7-4):
Prepare: Prepare and test the printer before normal operation
Control: Printer temp and motion parameter setting
Mixer: Mix-color ratio setting
Print from SD: TF/SD card printing
About Printer: The printer info
To Next Page
Loading...
Need help?
General
