Need help?Do you have a question about the Geeetech A30T and is the answer not in the manual?
General| Nozzle Diameter | 0.4 mm |
|---|---|
| Layer Resolution | 0.05 - 0.3 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Number of Extruders | 3 |
| Extruder Type | Direct Drive |
| Heated Bed | Yes |
| Bed Temperature | up to 100 °C |
| Nozzle Temperature | up to 260 °C |
| Operating System | Marlin |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Supported Materials | PLA, ABS, PETG |
| Display | Touchscreen |
Provides critical safety guidelines for operating the 3D printer, including voltage settings and handling hot parts.
Details the factory testing process and potential filament residue, assuring normal use.
Outlines risks associated with printing, such as filament clogging and unauthorized disassembly.
Details technical specifications like printing technology, volume, accuracy, speed, and materials.
Lists the printer's electrical specifications, including power input, output, and connectivity.
Provides physical dimensions and weight specifications for the 3D printer.
Guides through assembling the main frame components of the 3D printer, including attaching the gantry and base.
Details the process of connecting various wires, including Teflon tubes and extruder motor wires.
Instructs on verifying and setting the correct local voltage for the printer's power supply.
Explains how to properly place and feed filament onto the spool holder and into the extruder.
Guides through the crucial step of leveling the hot bed for optimal first-layer adhesion.
Explains the procedure for printing models directly from a TF card using the printer's interface.
Provides a visual representation of the touch screen menu structure.
Covers core touch screen operations including interface navigation, status monitoring, control commands, and settings.
Guides on installing necessary USB drivers for computer connectivity and printing.
Details the installation of slicing software like Repetier-Host and initial printer parameter setup.
Covers connecting the printer via USB, loading models, slicing, and initiating prints.
Describes the final steps for saving print files to a TF card and initiating printing.
Provides the download address for the Color Mixer software.
Explains the functionality of the Color Mixer for creating multicolor models.
Details the printer's ability to resume printing after a power interruption.
Instructions on enabling and using the filament run-out sensor for uninterrupted printing.
Guides on installing and using the 3D Touch sensor for automatic bed leveling.
Troubleshooting common issues related to abnormal filament extrusion, such as tangled filament or nozzle clogging.
Addresses problems with the extruder gear skipping, including nozzle clogs and voltage checks.
Solutions for first-layer printing issues like non-sticking or bed scratching.
Troubleshooting common causes of layer shifting during printing, like speed or belt tension.
Diagnoses common reasons for print interruptions and provides solutions for USB or TF card printing.
Outlines the terms and conditions regarding the use and modification of this user manual.
Provides legal disclaimers concerning product accuracy, liability, and warranties.
To Next Page
