Geeetech A30T User Manual

Shenzhen Getech Technology Co.,Ltd
34
（Picture 8-3）
8.2Install slicing software
Repetier-Host is the default slicing software here. Download address:
https://www.repetier.com/download-software/）
1) Set printer parameter
When Repetier-Host is installed, turn on the printer and open the Repetier-Host. Repetier-Host
supports several languages. You can choose your native language from Config>Language (Picture
8-4 for details).
（Picture 8-4）

Geeetech A30T Specifications

General

Brand	Geeetech
Model	A30T
Category	3D Printers
Language	English