Geeetech A30T User Manual

Shenzhen Getech Technology Co.,Ltd
35
English interface as picture (8-5):
（Picture 8-5）
Using the Repetier-Host for the first time, printer parameters need to be configured before
connecting. Click “Printer settings” on the top right corner, see picture (8-6).
（Picture 8-6）
It pops up the content as the picture below (8-7). Write down the relevant info accordingly.
(Pay attention to the highlighted parts).
a. Connection dialog:see picture (8-7)

Geeetech A30T Specifications

General

Brand	Geeetech
Model	A30T
Category	3D Printers
Language	English