Need help?Do you have a question about the Geeetech A20M and is the answer not in the manual?
General| Printing Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Build Volume | 255 x 255 x 255 mm |
| Layer Resolution | 0.1-0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Print Speed | 100 mm/s |
| Max Bed Temperature | 100°C |
| Connectivity | SD Card, USB |
| Frame Material | Aluminum |
| Number of Extruders | 2 |
| Bed Leveling | Manual |
| Power Supply | 24V/15A |
| Machine Dimensions | 442 x 447 x 480 mm |
| Supported Materials | PLA, ABS, Wood, PVA, HIPS |
| Print Bed | Heated |
| Display | LCD |
| Max Nozzle Temperature | 250°C |
Crucial safety guidelines for operating the 3D printer, including voltage and handling precautions.
Information about pre-shipment testing and potential minor residues on the printer.
Instructions on how to assemble the core structural components of the 3D printer.
Guidance on connecting the various wires and cables for proper printer functionality.
Procedure to verify and set the correct voltage input for the printer's power supply.
Instructions on how to correctly mount and prepare the filament for printing.
Detailed steps for accurately leveling the print bed for optimal first layer adhesion.
Guide on how to initiate printing using an SD card.
Visual representation of the LCD menu structure and navigation flow.
Overview of the primary functions accessible through the printer's LCD interface.
Steps to install necessary drivers for connecting the printer to a computer.
Guidance on downloading, installing, and configuring slicing software like Repetier-Host.
Instructions on how to perform printing directly from a computer via USB.
Steps for preparing and initiating prints using an SD card.
Link and instructions for downloading the Geeetech Color Mixer software.
Overview of the Color Mixer software's capabilities for multi-color printing.
Explanation of the feature that allows resuming prints after a power interruption.
Information about the reset button and its use in case of abnormal printer behavior.
How to use and enable the optional filament run-out sensor.
Information regarding the optional 3D touch sensor for automatic bed leveling.
Common issues related to filament extrusion problems and their solutions.
Troubleshooting steps for extruder gear skipping and noise issues.
Solutions for common problems with the first layer of a print.
Causes and fixes for layer shifting during the printing process.
Reasons and solutions for unexpected print stoppages.
Legal terms and conditions regarding the use of the user manual.
Legal disclaimers concerning product warranty, liability, and usage.
To Next Page
