Shenzhen Getech Technology Co.,Ltd
42
（Picture 8-19）
Choose “Geeetech A30T PLA high “as print configuration and “Geeetech A30T PLA high fi” as
printing material setting. Details see picture (8-20) below.
（Picture 8-20）
Now parameters setting are finished.
8.3 USB printing
You can start USB printing when the parameters setting finished.
The model file format is .stl for 3D printer. You can download free models from websites such as
thingiverse
. You can also design your own models.
To Next Page
Loading...
