Geeetech A10T User Manual

Shenzhen Getech Technology Co.,Ltd
13
(Picture 5-14)
 Connect the Z-axis motor and the Z-axis limit switch wire. See picture (5-15).
(Picture 5-15)
5.3Check the power input mode
The factory default voltage is 230V. You need to choose the correct voltage according to your
local standard requirement. See picture (5-16)
Note: Be sure the voltage is switched to the correct one.

Geeetech A10T Specifications

General

Brand	Geeetech
Model	A10T
Category	3D Printers
Language	English