Geeetech A10T User Manual

Shenzhen Getech Technology Co.,Ltd
31
(Picture 8-5)
Using the Repetier-Host for the first time, printer parameters need to be configured before
connecting. Click “Printer settings” on the top right corner, see picture (8-6).
(Picture 8-6)
It pops up the content as the picture below. Write down the relevant info accordingly.
(Red box is the key content)
a. Connection dialog ( Picture 8-7):
(Picture 8-7)

Geeetech A10T Specifications

General

Brand	Geeetech
Model	A10T
Category	3D Printers
Language	English