Geeetech A30 - Connect Geeetech A30

23
guidance.
4.1.1 Connect Geeetech A30
Connect the printer to your computer (Windows 7) with USB cable, the motherboard
driver installer will automatically appear and your OS will complete the overall installation
process. After the installation, please find the corresponding COM port in the Windows
"Device Manager". Turn on the power switch.
The following are detailed steps:
1. Start EasyPrint 3D (your first time to use EasyPrint 3D).
2. Click the [printer] menu on the top left to choose the corresponding COM port. The
COM refers to the serial port between your printer and computer, the same with the COM in
the device manager. If you can‘t find the COM, please check if the power switch is turned on
or the USB cable is well connected.
3. Select your printer.
Click the [printer] menu on the top left and choose the printer type as Geeetech A30.