Geeetech A30 User Manual

16
Switch on the Wi-Fi button and click the [Set] to visit the interface for Wi-Fi
configuration, as shown by the picture below.
The remaining settings shall be completed on the EasyPrint 3D App. Upon finishing all
the configurations, the Wi-Fi connectivity interface will display the relevant information.
When all the configurations are successful, the Wi-Fi icon will turn into green .
2.3.2 Language
Geeetech A30 is compatible with two languages: Chinese and English. You could switch
to the corresponding language for your need.

Geeetech A30 Specifications

General

Build Volume	320 x 320 x 420 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Supported Filaments	PLA, ABS, PETG
Display	LCD
Power Supply	24V
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Printing Platform	Removable glass platform