Geeetech A30 User Manual

15
2.3 Setting
Choose [Setting] on the home page to visit the following interface, composed of the
relevant settings for Wi-Fi connectivity, language, screen calibration, about Geeetech A30,
factory default, etc.
2.3.1 Wi-Fi Connectivity
This sub-interface shows the Wi-Fi switch, SSID, IP address, the IP of the server and the
button for autonomous Wi-Fi connectivity upon starting the printer [Connect Autonomously].

Geeetech A30 Specifications

General

Build Volume	320 x 320 x 420 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Supported Filaments	PLA, ABS, PETG
Display	LCD
Power Supply	24V
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Printing Platform	Removable glass platform