63
click―[OK]”and manually make the mobile Wi-Fi switch to Printer Wi-Fi (GT-printer).
Then come back to APP and click―[Next]”to redetect or return to the page of Wi-Fi
configuration to make the new one.
3) At ⑥, if a prompt of configuration fails to appear, please start again to make the
configuration.
4) If you have any questions, please contact with our technical support.
7. Specifications of Geeetech A30
Printing parameters
Printing technology: FDM
Build volume: 320*320*420mm
Printing accuracy: 0.05mm
Positioning precision: X/Y：0.11mm. Z： 0.0025mm
Printing speed: 80-110mm/s recommended
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Filament: PLA, ABS, nylon, wood polymers, etc.
Max temp for hotbed: 110℃
Max temp for extruder: 250℃
Software resources
Operating system: Windows, MAC, Linux
Remote App: EasyPrint 3D App
Control software: EasyPrint 3D, Cura，Repetier-Host，Simplify3D
File format: STL，OBJ，Gcode
Electrical
Power supply: DC 12V/41A
Connectivity: Wi-Fi, USB, SD card (support stand-alone printing)
To Next Page
Loading...
