Geeetech A30 User Manual

5
Taoglas，P/N
Within 2.4 GHz Band
2.4 GHz
2.412 - 2.472 GHz
802.11 b/g/n
FX831.07.0100C
2.5 dBi
Safety alert symbols precede each safety message in this manual. These symbols indicate
potential safety hazards that could harm you or others or cause product or property damage.
Warning: The Geeetech A30 generates high temperatures. Always allow the Geeetech
A30 to cool down before you reach inside.
Warning: The Geeetech A30 includes moving parts that can cause injury. Never
reach inside the Geeetech A30 while it is in operation.
Warning: There is a risk of shock. This product is not user serviceable.
Warning: Do not leave the Geeetech A30 unattended during operation.
Caution: Do not print using materials that have not been approved by GEEETECH for
use with the Geeetech A30.
Caution: The socket outlet must be located near the equipment and must be easily
accessible.
Caution: In case of emergency, please disconnect the Geeetech A30 from the wall
socket.
Caution: The Geeetech A30 melts plastic during printing. Plastic odors are emitted
during this operation. Make sure to set up the Geeetech A30 in a well-ventilated area.

Geeetech A30 Specifications

General

Build Volume	320 x 320 x 420 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Supported Filaments	PLA, ABS, PETG
Display	LCD
Power Supply	24V
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Printing Platform	Removable glass platform