Geeetech A10 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
2
Preparation
Step1. Open the box, taking out the foam box containing your A10.
Step 2. Remove A10 3D printer from foam box and set it down on a stable surface.
Note:
You will see a printing residue on the printing platform, which indicates your A10 has already gone through
the 24 hours aging test, you can feel free to use.
Step 3. Checking accessories
Please check the accessories based on the items in the assembly paper.

Geeetech A10 Specifications

General

Build Volume	220 x 220 x 260 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Bed Temperature	100°C
Connectivity	SD card, USB
Print Technology	FDM (Fused Deposition Modeling)
Frame Material	Aluminum
Heated Bed	Yes
Display	LCD
Machine Dimensions	478 x 413 x 485 mm
Max Nozzle Temperature	250°C
Supported Materials	PLA, ABS
Power Supply	24V