31
SHENZHEN GETECH TECHNOLOGY CO LTD
6.2 Install slicing software
Repetier-Host is the default slicing software here. Download address:
https://www.repetier.com/download-software/
Set printer parameters
When Repetier-Host is installed, turn on the printer and open the Repetier-Host. Repetier-Host
supports several languages. You can choose your native language from Config>Language (Picture
6-4 for details).
(Picture 6-4)
English interface for your reference (picture 6-5).
(Picture 6-5)
Using the Repetier-Host for the first time, printer parameters need to be configured before
To Next Page
Loading...
