Geeetech A10M User Manual

22
SHENZHEN GETECH TECHNOLOGY CO LTD
5.2 Main functions
LCD rotating knob:
 Press the knob: Confirm or enter the next menu.
 Rotate the knob: Roll the select options or change parameters.
LCD homepage, see picture (5-2)
1. Extruder temperature: Current temp/target temp
2. Hot bed temperature: Current temp/target temp
3. Mix-color printing ratio: E0; E1%
4. Feed rate: Current printing speed
5. Current Z axis value
6. Current printing process
(Picture 5-2)
Note: Rotating the knob can change the printing feed rate during printing. We suggest users not
changing the feed rate too much or it will cause the motors to skip and affect the print quality.
Press the knob to enter the next menu (Picture 5-3):
 Prepare: Prepare and test the printer before normal operation
 Control: Printer temp and motion parameter setting
 Mixer: Mix-color ratio setting
 Print from SD: SD card printing
 About Printer: The printer info

Geeetech A10M Specifications

General

Print Technology	Fused Deposition Modeling (FDM)
Build Volume	220 x 220 x 260 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Extruder Temperature	250°C
Max Hotbed Temperature	100°C
Connectivity	SD card, USB
Number of Extruders	2
Machine Dimensions	478 x 413 x 485 mm
Net Weight	7.8 kg
Filament Compatibility	PLA, ABS, Wood
Display	LCD
Power Supply	24V