Geeetech A10M - Page 23

23
SHENZHEN GETECH TECHNOLOGY CO LTD
(Picture 5-3)
(Picture 5-4)
The main functions of Prepare menu (Picture 5-5, 5-6):
 Move axis: Move X/Y/Z axis and Extruder
 Auto home: X/Y/Z axis homing
 Disable steppers: Unlock motors
 Preheat PLA: Manually pre-heat the hot bed and extruder before printing PLA.
 Preheat ABS: Manually pre-heat the hot bed and extruder before printing ABS.
(Picture 5-5)
(Picture 5-6)
The main functions of Control menu (Picture 5-7, 5-8):
 Temperature: Change the temp of the hot bed and extruder in real time
during printing. Customize the temp of preheat PLA and preheat ABS.
 Motion: Motion parameter setting in firmware. After modification, choose
“store memory” to save the change.
 Filament: Open or close filament detector; set filament diameter.
 Store settings: Save the parameters modified.
 Load settings: If you need to restore to the original settings, please choose
this option.