gefran BDI50 Series

4-69
09- 08
Err6 fault tolerance times
Range
【
0~20
】
 09-08 is relative to real communication messages. When a real message does not pass error
check, that message is resent. The number of errors for the same message are counted and
accumulated and if it reaches the setting of 09-08, BDI50 will show Err6 and stop according to
the setting of 07-09.
09- 09
Drive Transmit Wait Time
Range
【
5~65
】
2ms
 This parameter is used to set the converter to receive data from the sending date to the
beginning of the time.
09- 10
BACnet stations
Range
【1~254】