36 917001/CP0905
High-Flow Auxiliary Hydraulic Control (optional)
In addition to a standard-flow auxiliary
hydraulic system, some loaders are
equipped with a reversible high-flow aux-
iliary hydraulic system. The couplers are
located on the right lift arm. High-flow
auxiliary hydraulics are used for oper-
ating certain hydraulic attachments (e.g.,
cold planer, snowblower) that require
higher flows.
A 3-position control lever, located behind
the right control handle, is used to control
the direction of oil flow. The lever is
spring-centered, with a detent in the for-
ward position for continuous operation.
Figure 18 High-Flow Control
Lever (T-bar, Dual-Hand & Hand
Foot controlled units)
Figure 19 High Flow Control
(T-bar/Joystick controlled
units)
https://tractormanualz.com/
To Next Page
Loading...
