917001/CP0905 33
Lift/Tilt Controls
Moving the lift arm and tilting the attachment are accomplished by movement of
the foot pedals. The left pedal raises and lowers the lift arm; the right pedal tilts
the attachment. To raise the lift arm, push down on the back of the left pedal with
your left heal; to lower the lift arm, push down on the front of the left pedal with
the toes of your left foot. To tilt the attachment forward and down, push down on
the front of the right pedal with the toes on your right foot; to tilt the attachment
up and back, push down on the back of the right pedal with your right heel.
Note: The speed of the lift/tilt motion is directly proportional to the amount of
pedal movement and engine speed.
To place the lift arm into the detent (“float”) position, use the toes of your left
foot to push the front of the left pedal all the way down. This position allows the
lowered lift arm to float while traveling over changing ground conditions.
Never push the left pedal into the “float” posi-
tion with the attachment loaded or raised,
because this will cause the lift arm to lower very rapidly.
WARNING
https://tractormanualz.com/