What to do if GEM Controller displays 'In X no Signal'?
If the GEM Controller displays 'In X no Signal', the parameter In X is set to OFF / ON or Safe / ON. Connect a signal to digital input In X.
What to do if GEM 1436 cPos Controller displays 'In W no Signal'?
If the GEM Controller displays 'In W no Signal', the parameter In W is set to OFF / ON or Safe / ON. Connect a signal to digital input In W.
What to do if GEM Controller displays 'In 2 no Signal'?
If the GEM Controller displays 'In 2 no Signal', it means the parameter In 2 is set to OFF / ON or Safe / ON. Connect a signal to digital input In 2.
What to do if GEM 1436 cPos displays 'In 1 no Signal'?
If the GEM Controller displays 'In 1 no Signal', the parameter In 1 is set to OFF / ON or Safe / ON. Connect a signal to digital input In 1.
General| Brand | GEM |
|---|---|
| Model | 1436 cPos |
| Category | Controller |
| Language | English |
Guides the positioner through automatic setup for valve adaptation.
Covers document scope, symbols, terms, and warning note structure.
Details physical components, materials, operation, and fail-safe features.
Specifies operating parameters for medium, ambient temperature, and pressure.
Covers physical dimensions, weight, and noise emission.
Details power supply, consumption, analogue/digital I/O, and outputs.
Provides detailed measurements for positioner and various mounting configurations.
Guidelines for product receipt, handling, and storage.
Covers assembly steps for various mounting configurations and mechanical checks.
Illustrates pneumatic connections for different actuator types and general safety.
Details 24V supply, fieldbus, analogue/digital inputs, and outputs.
Covers default setting, automatic/manual initialization, and throttle adjustments.
Overview of display, buttons, menu levels, mode selection, and configuration access.
Details parameters for Service, SetBasics, SetFunction, SetCalibration, Communication menus.
Lists error codes, conditions, causes, and diagnostic messages for troubleshooting.
Guidelines for product cleaning and information on spare parts.
Explains control loop basics, terminology, and parameter effects on system behavior.
Instructions for environmentally sound product disposal and return process.
Official declarations of compliance with relevant EU directives.
To Next Page