Gemalto AT10K User Manual

Document Reader AT10K User Guide Specifications
Page 25 of 29
5. Specifications
Physical
Specifications
Dimensions
Length: 18.7 cm (7.4”)
Width: 16.0 cm (6.3”)
Height: 6.5 cm (2.6”)
Imaging Window
125 x 88 mm (4.92 x 3.47”)
4.0 mm (0.157") low iron glass with oleophobic coating
Weight
1.1 kg (2.42 lbs)
Electrical
Specifications
Input voltage
5 V DC, from external power supply or USB 2.0 host port
Power consumption
Less than 2.5W (USB 2.0 powered)
Connector
Barrel, locking
Environmental
Specifications
Temperature
Operating:–10°C to 50°C (14°F to 122°F)
Storage: –20°C to 50°C (–4°F to 122°F)
Humidity
Operating: 20% to 95% (non-condensing)
Dust*
IP52 rating for dust ingress protection in the optical chamber
Communication
Interfaces and
Protocols
Interface
USB 2.0, 480 Mbit/s “High Speed”
Host USB Power
Reader can be powered from a single host USB 2.0
connector (DC power supply also available)
USB connectors
One USB B connect (host)
Two USB A connectors (peripherals)
USB cable length
2.00 m (79 inches)
Aux. USB power
5V DC, 500mA per port (with external power supply only)
Power Supply
Specifications
Input voltage
100V to 240V AC +/-10%
Line frequency
47 Hz to 63 Hz
Cable length
Power supply cable: 1.3 m (52 inches)
AC line cord: 2.0 m (78 inches)
Power rating
15W
PSU Efficiency
Level VI
Regulatory
Information and
Standards
Directives*
2014/35/EU Low Voltage Directive
2014/30/EU EMC Directive
2014/53/EU RE Directive
2002/96/EC Waste Electrical and Electronic Equipment
(WEEE) Directive
2011/65/EU Restriction of Hazardous Substances (RoHS2)
Directive
* Testing in progress

Gemalto AT10K Specifications

General

Brand	Gemalto
Model	AT10K
Category	Card Reader
Language	English