CHANGES FROM PREVIOUS EDITION
The following changes have been made to this manual (WI742E) since the last edition (WI742D):
Page 3, added an "Important Note" with regard to the control panel and keypad version numbers.
Page 30, updated error codes with 2 new codes: "E40-00 - RF SELF TEST FAIL. Receiver Self-Test error." and "E66-00 - SERVICE. "Clean
Me" warning--Smoke Detector dirty. Clean detector or call installing company for service."
Pages 31-52, updated Glossary with address descriptions as specified in PCD-Windows Quickloader Download software.
NOTE:
Upon entering program mode, the keypad display will flash the control panel firmware version, followed by the keypad firmware version:
GEM-RP1CAe2: [2006], GEM-RP2ASe2: [205b], GEM-RP3DGTL: [20/1C]
THIS MANUAL INCLUDES FEATURES WHICH ARE ONLY AVAILABLE IN CONTROL PANEL FIRM-
WARE VERSION 30 OR LATER.
NAPCO Security Systems, Inc.
333 Bayview Avenue, Amityville, New York 11701
For Sales and Repairs, call toll free: (800) 645-9445
For direct line to Technical Service, call toll free: (800) 645-9440
Internet: http://www.napcosecurity.com
To Next Page
Loading...
