3 Program cont.
.
Select the time of day you want that TIME SLOT to represent:
To set the time when MORN will begin, press the
<TIME
or
TIME>
buttons to
move the set point forward or backward in time.
.
Select the next TIME SLOT and program temp and time:
Press
NEXT>
, the display will show DAY, for Period 2. Repeat setting temp and
time. Select the remaining TIME SLOT's, EVE and NITE. Program their temp
and time info.
.
Repeat the above procedures for each day of the week. Push DAY> button
to cycle through the days.
.
To COPY the program of the current day to another day, press COPY
program once.
COPY
will display on the LCD. The day icon for the source
day will go solid and the day icon for the destination day will flash. Use the
day> button to select the destination day.
.
Press COPY again to confirm the copy. If you decide you don't want to copy,
NEXT
P
TIMETIME
DAY
DAY
PG
5
To Next Page
Loading...
