EasyManua.ls Logo

Genave RXC-3000 - USB Port, Connector and Cable; Passwords; Restoring RXC-3000 to Default Programming

Genave RXC-3000
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RXC-3000 Hardware Installation and User Guide
9000-0000-040 Revision 10 18 of 46 Genave Electronics
USB Port, Connector And Cable
The RXC-3000 communicates with a computer over a USB 2.0 port. The port's connection is a mini
type B 5 pin USB receptacle. The maximum USB cable length is 16 feet.
Belkin cable F3U138-0 “6 foot USB Type A to mini 5 pin Type B”.
Passwords
The 5 character password locks out access to the sub menus.
Please refer to the Programming Guide 9000-0000-041 for more information
Restoring RXC-3000 to Default Programming
If during changes or setup, you need to return the RXC-3000 to a previous program, the RXC-3000
holds the last program downloaded to the unit through the USB in its memory.
Warning!!! Restoring the running program to its original program sent with the unit will delete
all previous changes to the running program.
Please refer to the Programming Guide 9000-0000-041 for more information

Table of Contents