Genave RXC-3000 - Controlling Heavy Loads with Relays

46 pages

Save Page as PDF

To Next Page

To Previous Page

RXC-3000 Hardware Installation and User Guide

9000-0000-040 Revision 10 24 of 46 Genave Electronics

(Example) Connecting RXC-3000 To Heavy Loads

Main Page

Table of Contents5
Specifications8
General Specifications8
Overview9
How It Works9
Building Blocks10
Menus and What They Mean11
Installing13
Mounting the RXC-300013
Attachment to a Pole13
Pole Mounting14
AC Wiring15
Power Connection15
DC Wiring16
Battery Backup16
Programming17
Installing Comstarg417
USB Port, Connector and Cable18
Passwords18
Restoring RXC-3000 to Default Programming18
Inputs19
Input Header Characteristics (J14 and J15)19
Triggering RXC-3000 from an Input20
(Example) Interfacing RXC-3000 to External Switches21
Outputs22
Relay Characteristics22
Output Header Pinout (aux Output)(J5)23
Pin 1 - Relay #123
Output Header Transistor Characteristics23
(Example) Connecting RXC-3000 to Heavy Loads24
PA Audio Port25
Pinout and Characteristics of External Amplifier Control Port (J11)25
Pinout and Characteristics of 600 Ohm Audio Port (J12)26
Setting PA Port Levels27
Radio Port28
Radio Port Pinout (J13)28
Radio Power Port28
Setting Rx Audio Levels29
Setting Tx Audio Levels29
Radio Audio Levels to PA Port30
How to Change Frequency (Maxon Radio Only)30
How to Change DCS/CTCSS (Maxon Radio Only)30
How to Set Wide/Narrow Bands (Maxon Radio Only)30
How to Set Squelch (Maxon Radio Only)30
Returning Radio to Default Settings (Maxon Radio Only)30
DTMF Decoder31
DTMF Decoder Characteristics31
Triggering RXC-3000 off of a DTMF String31
How to Enter/Adjust DTMF Strings31
DTMF Learn Mode31
Live Look" (DTMF Digit Grabber)31
Two Tone Sequential Decoder32
Two Tone Decoder Characteristics32
Triggering RXC-3000 off of a Two Tone Signal34
How to Enter/Adjust Two Tone Signal Strings34
Two Tone Learn Mode34
Live Look" (Two Tone Grabber)34
Real Time Clock35
Triggering RXC-3000 from the Real Time Clock35
How to Adjust Time35
How to Set Daylight Savings Dates35
Real Time Clock Battery35
MP3 Audio Player36
How Sound Files Are Played to the PA Port36
How the RXC-3000 Knows What Audio File to Play36
USB Port38
Adjusting Audio Levels38
Action LED38
Heartsafe39
Microsd Characteristics39
How to Program the SD Card40
Installing the MP3 Module41
ADPCM Audio Player42
How Sound Files Are Played to the PA Port42
How the RXC-3000 Knows What Audioto Play42
Creating ADPCM Files from .Wav, Etc42
TF Card (Microsd) Characteristics43
How to Program the TF Card43
How to Put an Audio File on to a TF Flash Card43
Misc43
Fuse43
LCD Display Backlight43
Heartbeat LED43
Fused Output Board44
DC - DC Converter44
Page Intentionally Blank45
Page Intentionally Blank46

Genave RXC-3000 - Controlling Heavy Loads with Relays

Table of Contents