RXC-3000 Hardware Installation and User Guide
9000-0000-040 Revision 10 40 of 46 Genave Electronics
How To Program The SD Card
To a computer, an SD card looks exactly like a USB memory stick or hard drive. Remove the SD card
from the MP3 module and insert it into a USB to SD card adapter.
Plug the USB reader into a USB port on your computer and the operating system will locate the card
and start working with it.
Once you have copied the files (remember to add leading numbers and hyphen) to the SD card, insert
the card back into the MP3 module and test the files by playing them with their associated actions.
To Next Page
Loading...