Genelec 1037 Setup Guide

15
Monitor setup guide
To achieve optimal sound reproduction we recommend to place two-way monitors
vertically. When a two-way monitor is placed horizontally, dierence in the
tweeter and woofer distances will cause reduction of sound level at the crossover
frequency when the listener moves sideways from the acoustical axis.
In the example below, the bass tilt control has been used to compensate for a low
frequency boost caused by a monitor close to a large wall.
8030 Bass Tilt -6 dB
20
30
40
50
60
70
80
50 100 300 600 1k
off axis-
Horizontal
positioning
0° on axis- 0° on axis-
notch
off axis-
Vertical
positioning
off axis-0°
off axis-0°
Large table or mixing console in front of the
monitors may cause a boost around 160-
200 Hz. Some Genelec monitors have a
desktop control DIP switch compensating
for this boost. SAM systems’ AutoCal will
compensate for this eect automatically.
dB
4 dB @ 160 Hz/ 200
frequency

Genelec 1037 Specifications

General

Brand	Genelec
Model	1037
Category	Speakers
Language	English