EasyManuals Logo

Genelec 1037 Setup Guide

Genelec 1037
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
For typical two-way systems, the recommended height of the monitor acoustical
axis is at the ear level, usually between 1.2 and 1.4 metres from the oor. Placing
the monitors higher with a slight tilt will minimise oor reections. For standard
stereo and multichannel reproduction, do not lift the monitors so high that more
than 15 degrees of tilt is required. Monitors should always be aimed towards
the listening position. The higher the monitor is from the oor, the lower is the
reection induced frequency response irregularities. However, half room height
placement should be avoided, as at low frequencies the ceiling is typically also a
reective surface.
Find the left-right symmetry axis of your room. Place the listening setup
symmetrically in the left-right direction.
60°
L
R
‹15° ‹15°
1.2-1.4 m
Monitor height (ITU-R BS.775-2 Recommendation)
Iso-Pod tilting

Other manuals for Genelec 1037

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genelec 1037 and is the answer not in the manual?

Genelec 1037 Specifications

General IconGeneral
BrandGenelec
Model1037
CategorySpeakers
LanguageEnglish

Related product manuals