To Next PageTo Next Page
Need help?Do you have a question about the Generac Portable Products 1900PSI 1908-0 and is the answer not in the manual?
Instructions for safely removing the pressure washer unit from its packaging.
Steps required to get the pressure washer ready for operation after assembly.
A review of assembly steps to ensure readiness before starting the engine.
Step-by-step instructions for starting the pressure washer for the first time.
How to inspect and clean the screen at the water inlet.
Inspecting the high pressure hose for wear, kinks, or damage.
Examining the hose used for detergent application for damage.
Inspecting the spray gun and nozzle extension for proper function and leaks.
Steps to remove air and contaminants from the pump system.
Instructions for inspecting and cleaning the in-line filter.
Information on obtaining and servicing O-rings for the unit.
How to flush the chemical injection hose after use.
Procedure for changing the oil in the pressure washer pump.
Refers to the engine owner's manual for engine maintenance.
Using PumpSaver to protect the pump from freezing and corrosion.
Guidance on preparing the engine for storage.
Lists causes and corrections for common pump performance issues like low pressure or erratic operation.
Troubleshooting steps for when detergent is not mixing with the spray.
Addresses engine performance issues under load.
Identifies potential causes for the pressure washer shutting down.
General| Pressure | 1900 PSI |
|---|---|
| Model | 1908-0 |
| Water Flow Rate | 1.2 GPM |
| Power Source | Gasoline |
| Weight | 44 lbs |
| Nozzles Included | 3 |
| Hose Length | 25 feet |
