EasyManuals Logo

Generac Power Systems 1292-1 User Manual

Generac Power Systems 1292-1
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
You now should know how to START your pressure
washer and how to STOP it. The information in this
section will tell you how to adjust the spray pattern,
adjust pressure, apply detergent. and rinse.
How to Use the Adjustable Nozzle and
Adjust Pressure
DANGER! Never adjust spray pattern when
spraying. Never put hands in front of nozzle to
adjust spray pattern.
Slide the nozzle forward for low pressure. Slide
the nozzle backward for high pressure (Figure
12).
Twisting the nozzle from side to side adjusts the
spray pattern from a narrow jet spray to a fan
pattern.
Point the nozzle toward the ground and press
the trigger to test the pattern.
Located on the top of the pump is a pressure
control knob. You can increase and decrease the
pressure of the spray by turning the knob
counterclockwise or clockwise respectively
(Figure 13).
Figure 12  Using the adjustable nozzle.
Slide nozzle backward
for high pressure
mode.
Slide Nozzle Forward
for low pressure
mode and detergent
application.
Twist nozzle
counterclockwise for
fan spray pattern.
Twist nozzle
clockwise for narrow
spray pattern.
Figure 13  Pressure control knob.
Pressure Control
Knob
Generac Portable Products 2300PSI High Pressure Washer

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems 1292-1 and is the answer not in the manual?

Generac Power Systems 1292-1 Specifications

General IconGeneral
BrandGenerac Power Systems
Model1292-1
CategoryPressure Washer
LanguageEnglish

Related product manuals