Generac Power Systems Deep Sea Electronics G8601

Table of Contents
Section 1: Introduction and Safety
Introduction ........................................................... 5
Read This Manual Thoroughly ..................................5
Safety Rules........................................................... 5
General Hazards .................................................... 5
Electrical Hazards ................................................. 5
Section 2: General Information
Equipment Description......................................... 7
G8601 Controller Overview .................................. 7
Specifications ........................................................ 8
Section 3: Controller Operation
Start Engine ........................................................... 9
Stop Engine............................................................ 9
ECU Override ......................................................... 9
Automatic Mode .................................................... 9
Waiting in Automatic Mode .................................. 9
Manual Mode.......................................................... 9
Front Panel Configuration.................................... 9
Accessing Main Configuration Editor............... 10
Editing a Parameter............................................. 10
Exiting the Main Configuration Editor .............. 10
Scheduler ............................................................. 10
Alarm Conditions ................................................ 10
Warnings...............................................................10
Electrical Trip Alarms ............................................. 11
Shutdown Alarms................................................... 11
Fault Alarms......................................................... 12
Adding New Language Files .............................. 23
Obtain Files .......................................................... 23
Installing the Language Files the DSE Con-
figuration Suite .................................................... 24
Installing the Language Files for DSE
Modules ................................................................ 24
Engine Aftertreatment Monitoring..................... 25
Pin Map................................................................. 25
Deep Sea Electronics® G8601 Controller Owner’s Manual 3