Setup and Operation
18 Installation and User’s Manual for Wi-Fi Module
Download Mobile Link and
Complete Registration
To complete Wi-Fi installation:
1. Go to
www.mobilelinkgen.com
.
2. Follow the on-screen prompts to create a
Mobile Link account.
3. Enter generator serial number to associate
the unit with the Mobile Link account.
4. Choose a service plan level.
5. Download the free Mobile Link application
(app) from either of the following
providers:
Figure 3-33. Mobile Link App Providers
6. Launch the app, complete the online form,
and click “Sign Up.”
Disable Wi-Fi
Use of the generator Wi-Fi module is optional.
If the owner does not wish to use Wi-Fi to
monitor the generator, the installer may
disable the system.
NOTE: Disabling Wi-Fi is a step in the
Installation Wizard and typically performed
during initial start-up of the unit. However, the
option remains available after installation
within the controller “Edit” menu.
Reset Wi-Fi to Factory Default
Settings
Contact an IASD if the Wi-Fi must be reset for
any reason. Factory default settings can only
be restored by a dealer.
To Next Page
Loading...