Generac Power Systems Mobile Link User Manual

General Information and Setup
Installation and User’s Manual for Wi-Fi Module 7
Wi-Fi Network Signal Strength
If the home Wi-Fi signal strength is
insufficient for communicating with the
generator, a wireless repeater (signal
booster) can be installed in the home.
Wireless repeaters may be purchased from
any local computer or electronics retailer.
Firmware Updates
Occasional updates may be released for the
generator controller operating system
(firmware). Once installed and activated, the
Wi-Fi module enables automatic reception of
firmware updates as sent directly from the
manufacturer.
Wi-Fi Specifications
Specification Value
Networking
standard
IEEE 802.11.b/g/n
Transceiver RS485
Module operating
power
5 VDC
Cable RS485
Supply voltage
(V+ to GND)
Nominal: 5 VDC
Minimum: 4.3 VDC
Maximum: 6.2 VDC
RS-485 charge
spike rejection
(either A or B); line
idle
Minimum 1.5 nC
UL Listing Number FTPM/E359637
FCC ID
(See engine divider
panel for label
location)
YOPGS2101M
IC Certification 9154A-GS2101M
CE R1603222
Telec 211-160302

Generac Power Systems Mobile Link Specifications

General

Brand	Generac Power Systems
Model	Mobile Link
Category	Measuring Instruments
Language	English