Setup and Operation
16 Installation and User’s Manual for Wi-Fi Module
Retry Network Connection
See Figure 3-28. Wi-Fi network connection
may fail if incorrect information is entered
during setup, such as a wrong network SSID
or password. If “Setup Failed” displays on the
controller, press “Yes” and follow the Wi-Fi
setup process from the beginning.
Figure 3-28. Wi-Fi Setup Failure
Reconnection
Reconnection to Wi-Fi will be required if there
are any changes to the homeowner’s network;
for example, a new router or ISP, a new
password, etc. To reconnect to the network:
1.
See Figure 3-29.
From the main controller
display, navigate to the Wi-Fi menu and
press ENTER.
Figure 3-29. Select Wi-Fi Menu
2. See Figure 3-30. Use
Up/Down
and
ENTER buttons to scroll to the REDO
WIFI SETUP? page. Select YES.
Figure 3-30. Redo Wi-Fi Setup Page
3. See Figure 3-31. The controller will display
SETUP WIFI NOW! with a timer. You have
30 minutes to connect Wi-Fi. Return to the
Wi-Fi Setup process.
Figure 3-31. Wi-Fi Setup Screen
NOTE: Reconnection may take a few minutes.
Observe the controller screens closely and
follow display instructions when prompted.
To Next Page
Loading...
Need help?
General
