Registration
Installation and Users Manual for Mobile Link
®
13
Section 5: Registration
Once the Mobile Link Wi-Fi/Ethernet device
has been installed, it should be registered and
activated to obtain full benefits of product
capabilities.
Gather the following information prior to initiat-
ing registration process:
E-mail address
Mobile Link Serial Number located on
label on back of unit. A second label on
packaging also includes the serial number.
Generator serial number located on label
plate, near control panel console.
Mailing address
Valid credit card
Address of generator location (if different
than mailing address)
Go to www.MobileLinkGen.com to complete
the registration process. The welcome screen
is shown in Figure 5-1.
1. Click Sign Up (A).
2. Enter requested information when prompt-
ed, then click Sign Up. (B)
3. Enter requested generator enrollment
information when prompted, then click
Enroll.
NOTE: The Mobile Link serial number is
located on the bottom of the device and on the
device packaging. The generator serial num-
ber is located on or in the area of the control
panel.
4. Select the types of alerts to receive, how
often to receive them, and whether the
alerts should be sent as text messages, e-
mail messages, or both.
Text alert settings can be configured to
deliver notifications of any or all
changes in generator status.
Status changes include such events as
faults, warnings, exercise confirma-
tions, or maintenance reminders.
Figure 5-1. Mobile Link Information Screen
009155
A
B
To Next Page
Loading...
