General 240H - Table of Contents

240H ONE MAN HOLE DIGGER
FORM GOM14081201, VERSION 1.1
Table of Contents
DESCRIPTION PAGE
Notice to Operators
Operator Instructional Data Sheet
Safety Precautions.
PREPARATION.
OPERATION.
MAINTENANCE, REPAIR, AND STORAGE.
GENERAL SAFETY INFORMATION.
Assembly
Before Starting the Engine
FILLING THE ENGINE CRANKCASE WITH OIL.
FILLING THE HOLE DIGGER TRANSMISSION WITH GREASE.
FILLING THE ENGINE FUEL TANK.
Digging Operation
OPERATIONAL DISCLAIMER.
CALIFORNIA PROPOSITION 65 DISCLAIMER.
SPARK ARRESTOR DISCLAIMER.
INFORMATION RELATIVE TO MINIMUM COMPONENT STANDARDS FOR THE OPERATION OF THE HOLE
DIGGER.
GENERAL TRANSPORTATION INFORMATION.
DETERMINATION OF POTENTIAL SUBSURFACE HAZARDS IN THE PROPOSED DIGGING LOCATION(S).
SET-UP FOR DIGGING.
STARTING THE ENGINE WITH THE AUGER CONNECTED TO THE AUGER DRIVESHAFT.
OPERATING THE HOLE DIGGER.
UNDERSTANDING KICKBACK.
BACK CARE/PROPER LIFTING INFORMATION.
MINIMIZING KICKBACK FROM AN OPERATIONAL STANDPOINT.
MINIMIZING KICKBACK FROM A DESIGN STANDPOINT.
OPERATING THE HOLE DIGGER CONTINUED.
STOPPING THE HOLE DIGGER.
TEMPORARY STORAGE FOR THE HOLE DIGGER WHILE ON THE JOB SITE.
ADDING AND REMOVING THE NONFLIGHTED AUGER EXTENSION.
Service
CHANGING THE HOLE DIGGER TRANSMISSION LUBRICANT.
MAGURA THROTTLE CONTROL MAINTENANCE PROGRAM.
AUGER MAINTENANCE PROGRAM.
REPLACING A WORN AUGER SCREW BIT.
REPLACING A WORN AUGER BLADE.
ENGINE SERVICE.
Repair
CENTRIFUGAL CLUTCH ROTOR AND SHOE ASSEMBLY REMOVAL AND INSTALLATION.
CENTRIFUGAL CLUTCH DRUM AND PINION SHAFT REMOVAL AND INSTALLATION.
Troubleshooting
ENGINE.
OPERATIONAL PROBLEMS.
Storage
Specifications
MSDS
Replacement Parts Diagrams
4
6
7
7
9
10
12
14
14
14
15
15
15
15
16
16
16
17
17
18
20
21
21
22
23
24
27
27
28
30
32
33
34
34
35
35
35
37
40
40
40
40
41
42
43
3