Safety Precautions
THE FOLLOWING SAFETY PRECAUTIONS
PROVIDE SOME COMMON SENSE GUIDES TO
PROMOTE SAFETY AND EFFICIENCY WITH THE
200 SERIES HOLE DIGGERS. NO WARRANTY,
GUARANTEE OR REPRESENTATION IS MADE BY
THE MANUFACTURER AS TO THE ABSOLUTE
CORRECTNESS OR SUFFICIENCY OF ANY
INFORMATION OR STATEMENT. THESE SAFETY
PRECAUTIONS ARE INTENDED TO DEAL
PRINCIPALLY WITH COMMON PRACTICES AND
CONDITIONS ENCOUNTERED IN THE USE OF THE
HOLE DIGGER AND ARE NOT INTENDED TO BE
ALL INCLUSIVE. PROPER LEVELS OF OPERATOR
EXPERIENCE, SKILL AND COMMON SENSE ARE
ESSENTIAL FOR SAFE AND EFFICIENT
OPERATION.
THE ENGINE EXHAUST FROM THIS PRODUCT
CONTAINS CHEMICALS KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH
DEFECTS OR OTHER REPRODUCTIVE HARM.
THIS STATEMENT IS MADE IN COMPLIANCE TO
CALIFORNIA PROPOSITION 65.
INCORRECT USE OF THE HOLE DIGGER CAN
RESULT IN PROPERTY DAMAGE, PERSONAL
INJURY OR EVEN DEATH. TO REDUCE THIS
POSSIBILITY, GIVE COMPLETE AND UNDIVIDED
ATTENTION TO THE JOB AT HAND AND FOLLOW
THESE SAFETY PRECAUTIONS:
PREPARATION.
1) The 200 Series Hole Diggers are a specialized type
of powered equipment, designed for a specific job
function and require adequate and thorough instruction
BEFORE operated. The size, power, complexity and
operating characteristics of this type of powered
equipment would dictate that each operator must
receive adequate, professional instruction regarding
the proper operation of this Hole Digger before being
allowed to utilize it. BEFORE attempting to utilize this
Hole Digger, read this Operator Manual, view the
applicable Safety and Operational Information DVD
and the material supplied by the engine manufacturer
to familiarize each operator with its correct operating
procedures. Avoid the urge not to take the necessary
time to read this Operator Manual before operating the
Hole Digger. DO NOT OPERATE THE HOLE DIGGER
UNTIL EACH OPERATOR COMPLETELY
COMPREHENDS THE CONTENTS OF THIS
MANUAL, THE APPLICABLE SAFETY AND
OPERATIONAL INFORMATION DVD, APPLICABLE
SUPPLEMENTAL INFORMATION AND THE
INFORMATION SUPPLIED BY THE ENGINE
MANUFACTURER.
2) Develop a comprehensive program for the safe
operation of the Hole Digger by its owner(s) and/or
operator(s). Such a program will include, but is not
limited to: instructional requirements for operation,
applicable OSHA requirements, local laws and
regulations, job site safety and a Hole Digger
maintenance program. Constantly examine and
upgrade this program to guarantee owner(s) and/or
operator(s) safety. Each operator must be fully
instructed regarding the specifics of this safety
program.
3) Determine that the Hole Digger is in its original,
factory configuration and has not been modified in any
manner. Many modifications can result in potentially
dangerous configurations that can lead to property
damage and/or personal injury. If there are any
questions about possible modifications made to the
Hole Digger, contact the Customer Service
Department for specific information BEFORE
utilization. There is no charge for this service.
4) Minors should never be allowed to operate the Hole
Digger. Bystanders, especially children and animals,
should not be allowed in the area where the Hole
Digger is in use. The hole digging process can result in
flying particles being emitted at high velocity and
striking the operator and/or onlookers. This can lead to
the possibility of property damage and/or personal
injury. Keep all body parts, loose clothing, foreign
objects and onlookers clear of the rotating auger
and/or auger extensions.
5) Operators must be in proper physical condition,
mental health and not under the influence of any
substance (drugs, alcohol, etc.) which might impair
vision, dexterity or judgment. Working with the Hole
Digger is strenuous. If you have any condition that
might be aggravated by strenuous work, check with
your doctor BEFORE operating the Hole Digger. Guard
240H ONE MAN HOLE DIGGER
FORM GOM14081201, VERSION 1.1
7
To Next Page
Loading...
