Need help?Do you have a question about the General E Z Pro and is the answer not in the manual?
Details the stock thickness and joint dimensions the jig can accommodate.
Lists all components included in the Mortise & Tenon Jig Kit.
Identifies and labels the main components of the jig assembly and its sections.
Details the parts of the router base bushing system and their functions.
Provides essential safety precautions and warnings for using the router and jig.
Guides on how to install the router base sleeve and guide bushing onto the router.
Explains the process of centering the router base plate with the jig system.
Instructions on how to set the router bit depth for accurate mortise and tenon cuts.
Describes methods for securely mounting the jig to a workbench.
How to mark workpiece centers for precise joint alignment.
Process of aligning the workpiece correctly within the jig using the centering wall.
Utilizes positioning bars to square and align the stock longitudinally.
Adjusting sliding templates to achieve the desired length for mortise and tenon joints.
Final adjustments for router bit plunge depth relative to joint depth.
Step-by-step guide for cutting tenons using the jig and guide bushing.
Instructions for cutting mortises accurately with the jig and guide bushing.
Information on how to obtain additional support and resources.
Details the warranty coverage for the Mortise & Tenon Jig Kit.
Presents two methods for mortising workpieces narrower than 2 inches.
Discusses methods to avoid or remove unwanted material ("fence") during tenon cutting.
Explains how to achieve precise or looser fits between mortise and tenon joints.
To Next Page
General
