EasyManua.ls Logo

General KCD series

General KCD series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
KCD SERIES
17”, 19”, 21” & 23”
HEAVY DUTY
LOW SPEED
110 V 60 Hz
OWNERS MANUAL
OPERATION PARTS WARRANTY CARE
SAFETY STORAGE ACCESSORIES
General Floorcraft
6312 NW 99th Ave
Doral, FL 33178
PH (305) 477-1557
FX (305) 477-1558
www.genfloor.com
IMPORTANT: READ OWNERS MANUAL CAREFULLY
Please fill out and return your Product & Warranty Registration Form!
5/22/2014
Question and Answer IconNeed help?

Do you have a question about the General KCD series and is the answer not in the manual?

General KCD series Specifications

General IconGeneral
BrandGeneral
ModelKCD series
CategoryFloor Machine
LanguageEnglish

Summary

Machine Assembly Overview

Handle Assembly

Lower Machine Assembly (17, 19, 21)

Lower Machine Assembly (23)

Motor Assembly

Gearbox Assembly

Delivery and Safety Instructions

Delivery and Inspection

Inspect machine upon delivery, report damage immediately to carrier.

Important Safety Instructions

General safety guidelines for commercial use, including electrical precautions.

Safety Instructions

General Safety Warnings

Warnings to reduce risks of fire, electric shock, or injury during operation.

Safety and Grounding Instructions

Grounding Instructions

Detailed guidance on grounding the appliance to ensure electrical safety.

Assembly and Operation Instructions

Prepare Machine for Operation

Steps for unpacking and setting up the machine for initial use.

Brush, Pad Driver & Pad Installation

Instructions for installing or removing brushes, pad drivers, and pads.

How to Operate Machine

Steps to safely operate the floor machine after setup.

Maneuvering and Storage Instructions

How to Maneuver Your Floor Machine

Guidance on controlling the machine's direction and movement.

After Use Procedures

Procedures for unplugging, cleaning, and storing the machine post-operation.

Limited Warranty

Product & Warranty Registration Form