Page 13
KCD-17, 19, 21 & 23” Series
MANEUVERING & STORAGE INSTRUCTIONS
HOW TO MANEUVER YOUR FLOOR MACHINE:
1.) Raise handle slightly and the machine will go to the right. The higher you raise it, the faster it will go
to the right.
2.) Lower the handle and the machine will go to the left. The more you lower it, the faster it will go to
the left.
3.) Note: Always practice in a wide open area on a smooth surface until you gain a comfortable experi-
ence in operating the machine.
AFTER USE
1.) Unplug the power cord from wall outlet.
2.) Remove the brush or pad driver.
3.) Remove the pad from pad driver.
4.) Flip the wheels down and place handle in the upright position.
5.) Clean the power cord if needed and inspect it for cuts, gashes and loose prongs. Perform any re-
quired maintenance or repairs before storage.
6.) Wrap the power cord around the handle bar and cable hook.
7.) Wipe the entire machine with a clean, damp cloth. Wipe the underside of the apron housing after wet
use.
8.) Store the machine in a clean, dry place.
To Next Page
Loading...
Need help?
General